How many drywall sheets will I need?

Divide the total wall and ceiling area by the sheet area (32 ft² for a 4×8), round up, and add about 10% for cuts. The Drywall Calculator does this and also gives the screws, compound and tape.

Why does the Insulation Calculator ask me for the coverage?

Because it isn't fixed. A bag of blown-in insulation covers far more area at R-19 than at R-38, and batt bundle sizes vary by brand. The number printed on your product's bag is the reliable input.

4-foot or 12-foot drywall sheets?

Longer sheets mean fewer butt joints, which are the hardest to finish flat, so pros use 12-foot sheets on long walls. They're heavy and awkward in tight spaces. Both give the same total coverage and the same estimate.

Drywall & Insulation Calculators

Interior finishing starts with the same area — the wall and ceiling surface — used two ways. The Drywall Calculator turns that area into a full take-off: sheets, screws, joint compound and tape for a standard three-coat finish. The Drywall Sheet Calculator is the sheet-count-only version for when you already have the fasteners and mud. The Insulation Calculator converts the area into packages of batts or bags of blown-in, using the coverage figure from your specific product — which depends entirely on the R-value and cavity depth, so it's an input rather than an assumption. Small openings aren't deducted from the drywall area; they become the cut-offs the waste allowance covers. Corner bead, adhesive, primer, vapour retarder and air-sealing are separate.

3 calculators · all live